Manipulator, SPC,PVC,WPC Flooring Line - AZUMI is a Manufacturer

Manipulator Introduction

AZUMI Machinery provides SPC/PVC/WPC flooring production line—Manipulator.

Operation Control System:
1. PLC program controller: Mitsubishi (Japan);
2. Touch screen: Mitsubishi (Japan);
3. Servo system: Mitsubishi (Japan);
4. Using the operating system of osike 6.0 developed by our company, the logic program is rigorous and reasonable,
Sensor System:
1. Photoelectric switch: otonix (Korea);
2. Proximity switch: otonix (Korea);
3.Magnetic switch: Adec.
Motion Control System:
1. Horizontal walking deceleration mechanism of manipulator: Zhongda servo reducer + Mitsubishi servo motor (Japan);
2. Linear linear guideway motion mechanism: arc gear train;
3. Synchronous belt wheel mechanism;

Manipulator Technical Parameter

Mechanical load transfer parameters

Parameter	Data
Maximum transfer speed	12 tablets / min
Transfer plate length	900-1860mm
Width of transfer plate	900-1350mm
Thickness of transfer plate	2.0-10mm
Grain depth of transfer plate	Less than 0.2mm
Weight of transfer plate	Less than 30kg
Maximum height of material pallets from the ground	The maximum deviation between the upward or downward warping of the main engine height transfer plate and the baseline is ≤ 10 mm
Input air source	0.5-0.7Mpa
working voltage	380V, 50Hz (3-phase, 5-wire, power must be grounded)

Leaving a message.