Jiangsu: (+86) 519-87326698
Jiangsu: Su Gao Xin Nan Da Innovation Park, Zhongguancun, Liyang City, Jiangsu Province
GRH-1500 high speed heating mixer is a new type of high speed heating mixer, which is based on absorbing foreign advanced technology. The paddles are used to turn the material at high speed and then have friction heat with the cylinder wall and there is also auxiliary electricityheating, these achieve the purpose of mixing materials.
High speed heater cooler mixer is one of the essential equipments in plastic processing. Used in the SPC/PVC flooring production line. It is mainly used for PVC, resin and other materials’mixing, and it is also suitable for the coloring and mixing of polyethylene, polypropylene and other granular materials, and also suitable for the early drying of wet resin products.
This mixing equipment has the advantages of even mixing, fast mixing speed, good dispersion. The machine is used for the highly efficient, continuous, automatic big and medium-sized plastic processing production line.





| Parameter | Data |
|---|---|
| Output | ≤3000 kg/h |
| Total volume | 1500L |
| Effective volume | 1050L |
| Mixing time | 10-12min/ Batch |
| Speed control mode | Inverter |
| Speed control mode | Inverter type Shenchuan inverter315kw |
| Heating mode | Friction heat/ Electricity heating |
| Material temperature | ≈110°C |
| Discharging method | Pneumatic |
| Compressed air pressure | 0.39~0.49MPa |
| Pouring hole No | 3 unites |
| Motor | Model:Y355L-4-V1 Power:315KW Rotating speed;990r/min |
| Tem.control method | Thermocouple,millivolt meter |
| Parameter | Data |
|---|---|
| Total volume | 6000L |
| Main shaft speed | 60r/min |
| Cooling time | ≤10min |
| Material cooling temperature | ≤60℃ |
| Cooling medium | cold water |
| Cooling medium pressure | ≤0.10MPa |
| Cooling medium consumption/cycle | 850L |
| Cooling water temperature | ≤20℃ |
| Tem.control method | thermocouple/millivolt meter |
| Discharge method | pneumatic |
| Compressed air pressure for discharge | 0.39~0.49MPa |
| Motor | Power:45KW |
A: A High Speed Heating Mixer is an industrial mixing machine used to rapidly mix, heat, and disperse plastic raw materials and additives. It is widely used for PVC, WPC, PE, PP, ABS, masterbatch, fillers, and other plastic compounds. High-speed rotating blades generate strong shear, circulation, and frictional heat to achieve a uniform mixture.
A: Raw materials are loaded into the mixing chamber, where high-speed blades create strong turbulence, shear, and circulation. Friction between the materials, blades, and mixing chamber generates heat while the additives are evenly dispersed. When the preset temperature or mixing time is reached, the material can be discharged for cooling or further processing.
A: For PVC dry mixing, the material temperature is commonly controlled around 100–130°C, depending on the formulation, material properties, and production requirements. The actual target temperature should be determined through testing and the customer’s specific formula rather than using one fixed temperature for all materials.
A: The mixing cycle depends on the mixer capacity, raw materials, formulation, blade speed, loading level, and target temperature. Many PVC applications can complete the heating mixing stage within several minutes, but the exact cycle time should be confirmed through material testing and production trials.
A: For many PVC dry-blend applications, a cooling mixer is recommended. After hot mixing, the material is transferred to the cooling mixer to reduce its temperature and improve storage and downstream processing stability. A hot and cold mixer combination is commonly used for continuous PVC compounding production.
A: Yes. The mixer can be equipped with an automatic control system for functions such as mixing time, temperature monitoring, speed control, and automatic discharge. PLC-based control can help improve batch-to-batch consistency and reduce operator intervention.
A: Yes. The mixer can be integrated into a PVC compounding and extrusion system. After hot mixing and cooling, the prepared dry blend can be conveyed to storage, feeding, or extrusion equipment according to the production process.